Skip to content
Home » News » Custom Rims & Tires Installation | DIY Vs Hiring A Professional

Custom Rims & Tires Installation | DIY Vs Hiring A Professional

Custom Rims On Ford truck

Are you considering installing custom rims and tires on your vehicle, but don’t know whether to do it yourself or hire a professional? It can be tough figuring out which is the best option for your specific situation. To help you make an informed decision, here’s some insight into the pros and cons of DIY vs hiring a professional for custom rim and tire installation.

The DIY approach can seem attractive due to its potential cost savings; however, there are several risks involved with customers taking this route that could end up costing more in the long run. Professional installations come with special tools and expertise that guarantee quality results as well as peace of mind – something many people value when dealing with their vehicles.

In this article we will discuss all these points in detail so that you have all the information needed to make an educated decision about how to install your new custom wheels and tires – either doing it yourself or by hiring a qualified technician. If you want to skip the hassle and hire some of the best custom vehicle specialists in Athens, check out Athens Auto Sports and schedule an appointment today.

Click here to follow Athens Auto Sports on Facebook!

Understanding Wheel Fitment

It is important to understand wheel fitment when shopping for custom rims and aftermarket wheels. Wheel and tire packages come in a variety of sizes, so it’s essential that you know the correct size for your vehicle before purchasing. Generally speaking, there are two measurements you need to be aware of: bolt pattern and offset.

The bolt pattern indicates how many lug nuts will secure the wheel, while the offset measures where the mounting surface sits relative to the centerline of the wheel. Along with these specifications, you should also pay close attention to weight ratings, as this can affect performance. Tire package selection is just as critical – tires must have a compatible load rating and width for optimal safety and handling capabilities.

All these components combined determine if a given set of wheels and tires are suitable for your car or truck. With all this information in mind, you’re now ready to start shopping for the best aftermarket wheels and tires!

Click here to check out Athens Auto Sports previous projects.

car repair, silhouette, replacement

Shopping For Rims And Tires

When shopping for custom Rims and tires, there are many aftermarket Rim brands to choose from. It is important to consider the type of driving you will be doing and what kind of aesthetic appeal you desire when selecting a set of wheels that fit your vehicle. In addition to this, tire packages can often provide discounts on both the rims and tires if purchased together. Researching online reviews or asking around at local car clubs can help determine which aftermarket wheel brands will offer the best quality aftermarket wheels.

The size of the rims also plays an important part in selection process as some vehicles require specific sizes for optimal performance. Many larger diameter rims may not even fit certain model of cars so it is essential to double check before making any purchases. The bolt pattern should also match up with the vehicle’s lug nuts accurately in order to ensure safe installation.

Finally, choosing a reputable store or dealer who specializes in high-end rims and tire packages is key to finding the perfect setup for your ride. Finding a shop that offers competitive prices, great customer service, and experienced technicians can make all the difference when it comes time to install your new wheel and tire package. With that being said, transitioning into researching about the tire mounting process is necessary for successful completion of project.

Check out all the other work we can do at Athens Auto Sports!

transport, template, texture

Tire Mounting Process

Installing a custom wheel is an exciting process, but it can be time-consuming and difficult. It’s important to know the correct procedure for mounting new wheels on your specific vehicle. There are many top brands of rims available, so finding the right product may require some research.

When it comes to tire mounting, there are two different methods: DIY or hiring a professional. The DIY method involves installing the wheels yourself with tools you already have at home. This option saves money, however it requires knowledge about mechanics and safety procedures in order to ensure that everything is installed correctly.

Alternatively, employing a professional offers several advantages over attempting installation as a novice. A professional will have access to advanced equipment such as specialized jacks and torque wrenches for precise alignment and stability. Additionally, they can help you choose from a inventory of various types of tires based on your budget and needs. Furthermore, pros also offer warranty for their services should any problem arise down the line.

Fortunately, whatever route you decide upon – DIY or pro – the end result of having properly mounted custom wheels will provide greater control when driving due to increased traction and improved handling characteristics. Now that we understand how to mount our custom wheels securely, let’s discuss what’s involved in proper tire balancing procedure.

Custom KMC Rims

Tire Balancing Procedure

Having just gone through the tire mounting process, it’s now time to move onto the next step of customizing your car – tire balancing. Tire balancing is an important step in ensuring that each wheel on your vehicle has enough stability and safety while driving. By properly balancing a wheel and its tires, you’ll be able to get the most out of your ride.

Fortunately, there are two options available when it comes to getting your wheels balanced – do-it-yourself (DIY) or hiring a professional technician. If going with the former option, make sure that you have all of the necessary equipment such as a balance machine, wheel weights, and sealing tape before beginning the job. On the other hand, having a professional perform this task will ensure that it is done accurately but at a higher cost due to labor fees.

No matter which route you take, taking care of proper tire balancing should always be taken into consideration as part of any custom rim installation project since it helps keep your car safe on the road while providing optimal ride quality. With this being said, we can move onto discussing some advantages associated with installing custom rims and tires in greater detail.

body kit, car, car wallpaper

Advantages Of Custom Rims And Tires

Custom rims and tires come with many advantages, from giving your car a unique look to improved performance. Installing custom wheels means you get free mounting, so there’s no costly labor involved in the process. Plus, you have more wheel options to choose from, allowing for a perfect fit that speaks to your style.

When it comes to selection, having custom rims and tires gives you access to the largest selection of sizes available on the market today. Whether you’re looking for an OEM-style setup or something aggressive and off-road ready, there are plenty of high-quality manufacturers out there offering great products at affordable prices. You can also find new sets of customized rims and tires designed specifically for certain vehicles, making it easier than ever before to customize your ride exactly how you want it.

All these benefits make installing a set of custom wheels and tires worth considering if you’re looking for a way to upgrade your vehicle and give it some extra flair. With all the styles and varieties available today, finding just the right combination is simpler than ever before. And when done correctly by a professional installer, they’ll be sure to last for years without any issues.

man, car, repair

Tools Needed For Installation

To properly install custom rims and tires, it’s important to have the right tools. Before starting any installation project, you should make sure that all of your materials are correct for the wheels you plan to fit and look at what kind of equipment is needed. You need a set of lug nuts or bolts that match the holes on the rim’s hub. A torque wrench helps ensure that these fasteners are properly tightened in place. It’s also helpful to have an impact gun if you’re working with alloy wheels because they can be difficult to remove without one. Having jack stands or ramps will help raise up your vehicle so you can access the wheel wells more easily during installation. Lastly, having an air compressor allows for proper inflation after mounting new tire and wheel sets onto your car or truck. This ends our section about tools necessary for successful custom rim and tire installations; next we’ll discuss DIY installation instructions.

DIY Installation Instructions

Now that you know the tools needed for installation, it’s time to get started with the steps of DIY rim and tire installation. The first step is ensuring the wheels fit correctly on your car; this includes checking their size, offset, and bolt pattern against your vehicle’s specifications.

When all those parameters match up, then you can go ahead and mount them to make sure they look right. After these two checks are completed, you can begin assembling parts such as wheel weights or tire pressure sensors before mounting them onto the rims. Finally, when everything fits securely without any gaps, it’s time to install the tires and inflate each one according to its recommended air pressure level.

Before heading out onto the road however, double check that each nut and bolt has been tightened properly and that there aren’t any leaks in the air valve stems or seams along the sidewalls of your new tires. With a careful eye and some patience during these last few steps, you should be able to complete your own DIY tire installation safely. Now that we have gone through all the necessary instructions for doing a DIY job, let’s take a look at some of the benefits of hiring a professional installer instead.

Tire Rack With Custom

Benefits Of Hiring A Professional Installer

When it comes to custom rims and tires, hiring a professional installer is the best way to ensure that the wheels fit properly on your vehicle. Professionals are experienced in knowing how to make sure the right look for your ride is achieved. They also have access to specialized tools which can help them accurately install your new wheels.

In addition, a professional installation will give you peace of mind that everything was done correctly and safely. Professional installers know exactly what needs to be done when installing custom wheels, as well as having all the necessary equipment for the job. This ensures that there won’t be any damages or malfunctions with your brand new setup. The confidence you get from this peace of mind makes it all worth it.

Having your custom rims and tires professionally installed by someone who knows what they’re doing is simply an investment in yourself and in your car’s safety. Knowing that you’ve made sure that your wheels were fitted correctly not only looks great but could end up saving you money down the road if something goes wrong due to incorrect installation procedures. Taking these extra steps now can pay off later! Cost considerations are important too, so let’s take a closer look at those next.

Click here to learn more about Athens Auto Sports.

triangle, quality, time

Cost Considerations

The cost of custom rims and tires installation depends upon whether you choose to do it yourself or hire a professional. Going the DIY route for the project can be much cheaper, but will require additional time to research as well as shop for the right fit. Additionally, if you don’t have experience with this type of installation, then attempting it on your own could end up costing more in the long run due to potential mistakes that would need correcting. Hiring a professional may save you money because they are experienced enough to get the job done quickly and correctly. The downside is that their services usually come at a higher price than doing it on your own.

No matter which option you choose, make sure to factor in all costs associated with getting the wheels looking just right — from shipping, finding the correct size and style of custom rims, purchasing new tires and paying for labor fees (if hiring a professional). With careful consideration of these factors, you’ll be able to determine what works best financially for your budget while still achieving the look desired.

Once you decide how much you want to spend on custom rims and tire installation, consider safety tips during the process so that everything goes smoothly.

Custom Weld Rims

Safety Tips During The Installation Process

Now that the cost considerations have been discussed, it’s important to look at safety tips during the installation process. It is essential for anyone handling such a project to be aware of any potential risks and dangers associated with custom rims and tires installations. Here are three key safety steps everyone should take:

  1. Read the Manufacturer’s Instructions – Every set of wheels comes with their own unique instructions, so make sure you read through them before beginning your install. This will ensure that you handle each step properly and avoid making mistakes while installing or damaging components in the process.

  2. Wear Protective Equipment – Whenever working on a vehicle, it is always wise to wear protective equipment like gloves, goggles, coveralls, etc., as they can protect against cuts or other accidents. Additionally, if dealing with multiple sets of wheels/tires at once, use proper lifting straps to prevent injury from heavy loads being dropped or mishandled.

  3. Be Aware of Surroundings – When installing new parts on a car, always pay attention to what is around you and be mindful of where items may go flying in case something goes wrong – this could include tools getting loose or nuts coming off bolts unexpectedly. Make sure nearby walls or people don’t get hit by anything suddenly moving out of control!

With these safety tips in mind when performing an installation job yourself or hiring someone else to do it for you, it’s time to turn our attention towards wheel alignment after installation has been completed. Doing this correctly helps keep vehicles safe on the road and ensures they last longer too!

Wheel Alignment After Installation

Once the wheels and tires have been installed, it’s time to align them for optimal performance. It’s important to make sure that your car is aligned correctly as it can affect how well you drive and help prevent uneven tire wear. DIYers should be aware of a few key points when attempting an alignment on their own.

First, most cars need special tools or equipment in order to properly perform an alignment. If you don’t have these necessary items available, then it may be best to hire a professional instead. Second, there are certain types of adjustments that require knowledge about different suspension systems and components – something many DIY mechanics lack. Finally, not all wheel alignments are created equal – some will last longer than others depending on the type of vehicle and driving conditions.

Having your wheels aligned by a pro allows for precise adjustments with the right level of expertise and experience needed to ensure your car runs efficiently over time. A qualified technician will also know exactly what settings work best with specific vehicles while taking into account various factors like road surface quality and weight load distribution. With this in mind, proper torque specifications must be followed during installation in order to prevent any problems down the road.

Conclusion

In conclusion, custom rims and tires can be a great way to improve the look of your vehicle. When it comes to installing them yourself or hiring a professional, there are several factors to consider. DIY installation requires more knowledge and precision than most people realize. However, if you’re up for the challenge, it may save you money in the long run.

For those who aren’t confident in their abilities, seeking out an experienced technician is often the best option. They will understand wheel fitment, tire mounting processes and balancing procedures that must be followed for safe operation of your car. Professional installers also have access to specialized tools which make things easier and faster.

Leave a Reply

Your email address will not be published. Required fields are marked *